Factory licensing matters because it connects the premises, manufacturing activities, and proposed operating particulars with the safety and compliance requirements that apply to the operation. In West Bengal, management can use the approved plans, application particulars and licence conditions to check whether conditions on each shift match the operation the authority originally considered. Managers then put those requirements into practice through supervision, training, maintenance and corrective action. The value of the licence depends on how consistently the factory applies those safeguards as production and staffing change.
When Factory Licensing Applies in West Bengal
Start with what happens on the premises, how the process uses power and how many people work there. The Occupational Safety, Health and Working Conditions Code, 2020 came into force on 21 November 2025 and repealed the Factories Act, 1948, subject to savings. For factory safety, health and working conditions, West Bengal is the appropriate government for factories in the state. Check the Directorate of Factories’ instructions for the service and office responsible for your premises.
Check the Process, Power and Worker Count
Under the Code, the general factory threshold is 20 workers where a manufacturing process uses power, or 40 where it runs without power. Manufacturing can include finishing, repairing or packing goods, depending on the activity. Identify how the process itself uses power before choosing the threshold. Check whether the relevant number worked on any day in the preceding twelve months, as well as who works there now. Count across all groups and shifts in a day. Then check which people meet the Code’s definition of worker, including eligible personnel engaged through contractors, using the work they do and the terms of their engagement.
Also check whether a West Bengal law sets a different threshold or a notification applies factory provisions to your premises regardless of headcount. The Directorate’s older materials use the thresholds from the repealed Act, so confirm the current basis for counting before relying on a legacy checklist. Further, the Code’s provisions on registration and employer duties can apply to establishments below the general factory licensing thresholds. For example, Chapter II can cover manufacturing premises with ten or more workers even below the general factory thresholds. Check both questions before deciding which obligations apply.
Distinguish Plan Approval, Registration and Licensing
The Directorate’s services distinguish plan approval and permission to construct, extend or use a building as a factory from the factory licensing application. Check what permission your project needs before proceeding with the relevant work or taking the building into use. Registration records the establishment’s particulars, while the licence authorises operation under the applicable conditions. Follow the current West Bengal route for registration and licensing before starting production. Separately, the Code requires the factory employer to give electronic notice of commencement. Confirm the prescribed timing, recipient, and method before setting the startup date.
How Licensing Particulars Relate to Working Conditions?
Use the plans to locate activities and the supporting particulars to check their scale. The state’s plan approval process calls for site and layout plans and a manufacturing process flow chart. The registration and licensing application uses particulars such as the machinery list, installed power, and worker numbers. Older West Bengal licences can specify the premises, worker numbers, power, and validity period. Check your issued licence for the particulars and conditions that govern operation. Keep the plans and submitted records available so managers can see the detail behind those conditions.
On the floor, trace how workers, materials and vehicles move between production and storage. For example, check whether workers have enough space to load, clean, and maintain machinery without stepping into vehicle routes. Where pedestrians and vehicles cross, observe the crossing during a shift change or a delivery. Compare where the layout places ventilation and welfare facilities with where people actually work. In addition, walk each emergency route to check whether doors, aisles and exits remain accessible at busy times.
Suppose a factory proposes a new packaging line beside a route to an emergency exit. Before installation, compare the line’s footprint, power needs and staffing with the approved layout and operating particulars. Then assess how finished goods and waste will move when the line runs. If pallet staging blocks access, revise the proposal and check whether the change calls for plan approval, an amendment or a notification before work begins.
What Worker Safety Requires After Licensing?
The Code places workplace safety duties on the employer and includes the occupier in that role for a factory. The occupier should give managers the resources and authority to implement safeguards. Managers can then assign checks to supervisors and contractor coordinators while retaining oversight of overdue actions and recurring faults. Give each shift a named contact who can arrange immediate corrective action if a safeguard fails.
Machinery Safety, Access and Maintenance
Provide and maintain safe plant and systems of work, and keep access to workplaces safe. In practice, check guarding where workers could reach moving parts. Guards reduce contact with rollers, belts and other moving components during normal operation. If cleaning or maintenance requires access inside a guarded area, use an isolation procedure that prevents unexpected movement and address stored energy before work starts.
Use scheduled maintenance to find defects before workers have to work around them. For example, a supervisor who finds a loose guard should restrict use of the equipment until the responsible team makes the area safe. Then verify that the guard works during normal operation. Inspect pedestrian routes as well, since a safe machine can still sit beside an unsafe crossing.
Training, Occupational Health and Emergency Readiness
The employer must provide the information, instruction, training and supervision necessary for safe work. Use practical demonstrations and have workers show how they perform the task. When equipment or duties change, check that operators and maintenance workers can apply the revised procedure. Similarly, contractor coordinators can brief incoming teams on local hazards and verify who controls access and equipment isolation.
Match ventilation and exposure controls to the process. Where tasks generate fumes or dust, check whether extraction captures the contaminant where it arises. Verify applicable welfare requirements and keep drinking water, washing and sanitary facilities accessible. In addition, check that emergency arrangements cover each shift, including periods when fewer supervisors or first aid personnel are present. Clear routes aid evacuation, while assigned roles help workers know who raises the alarm and checks attendance.
If the factory carries on a hazardous process within the Code’s definition, review the additional duties that apply. These include the occupier’s health and safety policy at registration and disclosure of relevant hazards and safeguards. Verify the applicable requirements for exposure monitoring, health examinations, and emergency planning. Written work instructions and checks can help managers put those duties into practice.
What Records and Inspections Can Establish?
Use records to see whether controls work in practice. For example, maintenance logs can show recurring faults that an isolated inspection might miss, while training records can show who needs instruction after a process change. Keep applicable statutory records in the prescribed format and use internal evidence to fill gaps in how management monitors performance.
Keep Inspection Evidence Ready
Assemble the documents that match the site, equipment and duties. Check which records the applicable rules require and who can retrieve them during an inspection.
- Keep the current licence, approved plans and relevant application particulars together.
- Have statutory registers, equipment examination reports and maintenance logs available where applicable.
- Keep training and supervision records, including any evidence the applicable rules require.
- Retain inspection correspondence, replies and evidence that management completed corrective action.
Close Findings and Assess Reporting Duties
Record each finding with its location, risk, and any direction the inspector gives. Then assign a person to make the correction, agree on a completion date within any official deadline, and specify how to check the result. For example, after clearing an obstructed exit, observe it on another shift to see whether stock returns. If it does, change the storage arrangement and verify that the route stays clear. Respond through the prescribed channel and retain the reply and supporting evidence.
Encourage workers to report incidents and near misses internally so management can investigate hazards. Separately, the Code requires notice for specified accidents, including fatalities and qualifying injuries, prescribed dangerous occurrences even without injury, and listed occupational diseases. For a reportable factory accident, the employer or manager must notify the prescribed authorities. For prescribed dangerous occurrences and listed diseases, the employer has reporting duties. Check the applicable recipients, form and deadline for each event. Before an incident occurs, assign someone to confirm the reporting route and retain proof of dispatch.
Review Compliance When Operations Change
Review the approved plans, registration particulars and licence when the factory changes its layout, machinery, process, materials, staffing or responsible personnel. Then identify how the proposal affects workers and which records or permissions it touches. You can also ask a factory licence consultant in West Bengal whether a proposed change affects the factory’s licensing particulars or application route.
Check What Each Change Requires
- Compare layout and machinery changes with the approved drawings, installed power, and licence particulars. Check access, guarding and maintenance space.
- Review process changes and new hazardous materials for exposure, storage, waste handling and emergency arrangements.
- Check whether a workforce increase changes operating particulars or triggers additional welfare or safety duties.
- When the occupier or manager changes, verify who must notify the authority, what records need updating and when the change takes effect.
Check separate approvals before commissioning. For example, a new production line may change emissions or add steam equipment. Check whether the pollution control authority requires a consent change or whether the boiler authority requires registration or inspection. Likewise, review fire requirements if the project changes the building or materials stored.
Check Licence Validity During the Transition
Section 119 of the Code preserves qualifying factory licences that holders obtained under a Central labour law before commencement for their original validity period. It requires holders to obtain a licence afresh after expiry. Separately, the savings provisions preserve earlier actions and rules to the extent they accord with the Code and remain in force. If you rely on an earlier registration, also check what details you must give the relevant registering officer, in which form and within what prescribed period.
West Bengal published draft occupational safety rules in July 2026. Check the latest Gazette for final rules and their effective date. The Central Rules govern centrally administered cases. For state procedures, check the applicable West Bengal rules and notifications. In the meantime, confirm with the Directorate which saved procedure or current filing route applies. Check the licence expiry and whether its particulars still cover your operation. If the portal still calls the service renewal, confirm which filing the Directorate expects for a licence approaching expiry.
Conclusion
Use the factory licence and approved plans to check the operation against what workers face each shift. Supervisors should verify that access stays clear, guards work and workers can apply their training. Meanwhile, management should close inspection findings, check reporting duties and review approvals when the operation changes. Before signing off on any change, walk the affected area with the approved layout and compare the proposed machinery, staffing and work routes with current operating particulars.
Frequently Asked Questions
How does a factory licence support employee safety in West Bengal?
It sets the terms under which the factory may operate. Compare the licence with the approved plans and application particulars to see whether conditions on the ground match what management proposed. For example, check that workers can move between production areas safely as staffing and material flows change.
How can a business check whether its premises require a factory licence?
Check whether the premises carry on a manufacturing process, whether it uses power and how many workers work there across all shifts on a day. Review the preceding twelve months where relevant. Then ask the Directorate about any notification for the premises and assess any wider duties under the Code.
How do factory plan approval, registration and licensing differ?
Plan approval concerns the proposed premises and works. Registration records the establishment’s particulars, and licensing authorises operation under applicable conditions. When scheduling a project, verify which permission you need before construction, extension, or taking a building into factory use. Then check what you must submit before operations start.
What safety duties continue after a factory obtains a licence?
The employer must keep the workplace and work systems safe, provide necessary instruction and supervision, and meet applicable health and welfare requirements. In practice, check that guarding, safe access and emergency arrangements remain effective on every shift. Review each control after equipment repairs, staff changes or changes in production.
Who is responsible for carrying out and monitoring factory safety duties?
The Code includes the factory occupier within the definition of employer. Managers and supervisors can organise and monitor the work, and particular provisions can assign duties directly to the manager. For each requirement, identify the legal duty holder and name the person who will carry it out and report problems.
Which safety documents should management keep ready for an inspection?
Keep the licence, approved plans and applicable statutory records available. Depending on the site, also assemble equipment examination reports, training records, maintenance logs and any previous inspection correspondence. Then check that documents reflect current staff, equipment and layouts and that someone on site can retrieve them during the visit.
What should a factory do after an inspector identifies a safety deficiency?
Record the finding, address any immediate risk, and follow the inspector’s directions and deadline. Assign someone to make the correction and specify what evidence will show that it works. Then verify the result during normal operations and retain the reply and evidence you submit through the required channel.
Can changes to machinery or layout affect a factory licence?
Yes. A change can affect plans, operating particulars or safety conditions, depending on what you propose. Before moving or installing equipment, compare the proposed layout, power and workforce with the existing records. Then ask whether the change requires prior plan approval, an amendment to the licence or a notification.
Does a factory licence cover fire, pollution or boiler approvals?
Fire, pollution control and boiler authorities administer separate requirements. Check which approvals apply to your building, process and equipment. For example, before bringing a boiler into use, check the applicable registration and inspection requirements. Keep the dates and conditions for each relevant approval alongside the factory licensing records.
What should an existing factory verify during the labour code transition?
Check whether the Code preserves your licence and confirm its original expiry date. Also compare its operating particulars with current production and staffing. Before expiry or any material change, confirm the applicable filing route with the Directorate and check for final West Bengal rules and any relevant commencement provisions.
